When purchasing hotel furniture, the first step is to measure the area of the room where the hotel furniture is intended to be placed, calculate the dimensions such as length, height, width, and depth, and make sure to "seat according to the number" when purchasing. When configuring new hotel furniture indoors, the area of the hotel furniture should be considered. The floor area should preferably not exceed 45% of the ground area, and the highest level of wall furniture in hotels should not exceed 80% of the wall height.
When purchasing hotel furniture in the same room, attention should be paid to the unity of style, shape, and style, and the color tone should be harmonious. If replacing individual hotel furniture, it is also necessary to choose a color that is as similar as possible to the original indoor hotel furniture. Small rooms or rooms with poor lighting conditions should use light colored or light tone color matching hotel furniture to create a spacious and bright visual experience. For large rooms and well lit rooms, it is advisable to choose dark hotel furniture to highlight the ancient and elegant atmosphere.
Before purchasing hotel furniture, it is necessary to master several data, such as the top surface of the bedside table should be 200 to 220mm higher than the horizontal surface of the bed drawer board (excluding the mattress). The depth of hanging wardrobe shall not be less than 500mm, the space height for hanging long wardrobe shall not be less than 1350mm, and the space height for hanging short clothes shall not be less than 850mm. The vertical distance between the table top and the seat surface of the chair should be between 280 to 320 millimeters. Due to the significant difference in the ratio of human height to upper and lower body height, purchasing should be based on the principle of whether sitting on a chair to write or eating is comfortable and relaxing, and a choice should be made within this data range.
Quality requirements at the time of purchase
When choosing hotel furniture, it is important to pay attention to quality. The material and internal quality of hotel furniture depend on whether the wood material rots, scars, or is eroded by insects; Are there any collapses or minor cracks in the connection parts between parts due to rough machining; Whether the internal materials are processed smoothly and without burrs; Whether the tenon joint or connection is firm and free from looseness; Whether the surface of the panel is flat and free from obvious warping; The selected man-made board must be sealed and free of formaldehyde pungent odor. Thin wood or other decorative materials should be sturdy and smooth, without defects such as peeling, dents, and bubbles; Medium density Flat noodles or chipboard shall not be used as load-bearing parts such as frame, column and support; Drawers should preferably have metal or plastic slides. If there is no slide, the drawer can be pulled out 2/3. The sag should be within 20mm, and the swing should be within 15mm.
In the selection of appearance quality, it should be viewed from the overall outside: whether the texture direction of symmetrical components (especially bedroom cabinet doors) wood or other coating materials is consistent or similar; Whether the surface paint film is hard, full, uniform, smooth, without collision or scratches, with consistent color depth, and a delicate and smooth feel. Some hotel furniture, such as hanging wardrobes and glass decorative cabinets, should be coated with paint or other decorative materials to ensure a very clean interior; If there is a mercury mirror, it must be installed on the back plate and fixed with a pressure strip.
The above is the relevant content of "How to purchase hotel furniture for value.